Pool and spa cleaning for non-tiled surfaces

We provide pool and spa dry ice cleaning for non-tiled surfaces across New Jersey, New York, Pennsylvania and Delaware. Schedule cleaning with your pool contractor, facility team or property manager.

Deposits removed from non-tiled pool and spa surfaces

The scope distinguishes oily films and surface grime from hard mineral scale, stains beneath a finish and coating deterioration. Cleaning targets attached deposits on the specified non-tiled surface, with the approved sample defining the removal endpoint.

Operational benefits

• Treat specified buildup without adding abrasive blasting grit.
• Define the handoff before repairs, refilling or other pool-service work.
• Coordinate cleaning with the pool professional’s preparation and the property’s closure window.

Non-toxic dry ice and eco-friendly cleaning benefits

Dry ice is a non-toxic cleaning medium. Dry ice blasting cleans with solid CO₂ and compressed air without detergents, solvents, wash water or added abrasive grit. Its environmental benefits include no chemical rinse water and no spent blasting media from the blasting step.

Food-grade dry ice is a food-safe cleaning medium used for food-processing equipment. Food-facility cleaning still follows the site’s sanitation, allergen-control and equipment-release procedures.

The dry ice turns into gas. Removed deposits still require collection, and ventilation and protective equipment remain part of the cleaning setup.

Start pool and spa dry ice cleaning with the finish

Identify the material beneath the buildup and the finish that should remain. Include the surface product or manufacturer’s information when available. Note the age of the finish, any repairs, earlier treatments, and areas where the condition differs.

Photograph the whole pool or spa, then add close views of the target surface. Mark the boundary between the area to clean and adjacent fittings, joints, decorative details, or finishes. A project with several materials needs a separate review for each surface.

Describe what you want removed and the appearance you expect after cleaning. If the deposit is unknown, say so. Include any information from the pool service contractor or finish supplier rather than treating every mark as the same cleaning problem.

Review the cleaning result on a representative area

Choose a test area that reflects the actual surface and buildup. Agree on what the review should establish, including deposit removal, retained finish, texture, and agreed limits on remaining marks. Record the starting condition before the test.

Review the result with the owner or responsible contractor before extending the scope. Keep the accepted sample and photographs as a reference. Where the finish is already worn, repaired, or deteriorated, include that condition in the assessment.

Use a test cleaning for an unfamiliar material or deposit. The applications and limitations guide explains why the surface and desired result belong in the method review.

Coordinate preparation with the pool professional

Identify the contractor responsible for the pool or spa system. Agree on the work condition, access, and preparation before scheduling the cleaning. Do not drain a pool solely to prepare for a quote; have the responsible pool professional determine any draining or water-level requirements.

Describe the route from the staging area to the work zone. Include gates, steps, enclosed areas, nearby occupied spaces, and restrictions on working hours. Plan ventilation, work-area separation, and the collection of removed deposits as part of the cleaning scope.

Assign any equipment isolation, finish repairs, refilling, water treatment, and return-to-use checks to the responsible parties. Put the cleaning endpoint and the following steps in writing.

Plan work at a home, hotel, or managed property

For a hotel or shared facility, provide the planned closure window and the person who manages access. Coordinate the work with hospitality operations or property management. For surrounding building equipment, use facility cleaning.

• Project address or ZIP code and site contact.
• Overall photographs and close views of the non-tiled surface.
• Finish details, repair history, and known deposit information.
• Areas to clean, finishes to retain, and desired result.
• Access restrictions and the preferred work window.

Pool and spa dry ice cleaning questions

Is this a tile-cleaning service?

This page covers non-tiled pool and spa surfaces. Identify the specific area and finish in your inquiry so the scope is clear.

Can you quote from photographs?

Photographs start the review. Surface details, access, and a representative test may be needed before the final scope and price are confirmed.

Does the cleaning scope include repairs or pool servicing?

List those tasks separately with your pool contractor. The cleaning proposal should state its endpoint and the responsibilities for subsequent work.

Get a pool and spa cleaning quote

Get a pool and spa cleaning quote with your photos, location, and preferred dates. Identify the non-tiled surface and what you want removed so we can discuss the next step.