Commercial Kitchen Equipment Dry Ice Cleaning

Our commercial kitchen equipment cleaning service uses dry ice blasting to remove grease and production deposits at restaurants, hotels and catering facilities.

Remove stubborn grease and baked-on food from commercial kitchen equipment without wash water or added cleaning chemicals. Schedule the work around planned closures and maintenance to reduce disruption to food service.

Deposits removed by commercial kitchen equipment cleaning

We remove grease, baked-on food residue and carbonized production deposits from specified ovens, trays and accessible equipment surfaces. Product-contact areas, coatings and the kitchen’s sanitation procedures remain identified in the scope.

Commercial kitchen equipment cleaning benefits

• Replace repeated hand scraping for the agreed attached deposits.
• Clean accessible equipment without adding a water rinse or blasting grit.
• Fit deposit removal before the kitchen’s required sanitation and reopening checks.

Food-production references and related services

For production facilities, review food and beverage equipment cleaning and food processing equipment cleaning.

Read the FDA, EPA and USDA reference guide for food-grade media requirements and the distinct scope of each agency’s sources. Food-use provisions and technical guidance do not establish blanket approval of dry-ice blasting in food plants.

Dry ice media for commercial kitchen equipment cleaning

The cleaning medium is non-toxic dry ice. Dry ice blasting cleans with solid CO₂ and compressed air without detergents, solvents, wash water or added abrasive grit. Its environmental benefits include no chemical rinse water and no spent blasting media from the blasting step.

Food-grade dry ice is a food-safe cleaning medium used for food-processing equipment. Food-facility cleaning still follows the site’s sanitation, allergen-control and equipment-release procedures.

The dry ice turns into gas. Removed deposits still require collection, and ventilation and protective equipment remain part of the cleaning setup.

Commercial kitchen equipment cleaning applications

Dry Ice Energy’s hospitality application page discusses cooking and kitchen-equipment deposits. Your project should identify the exact component and any manufacturer restrictions before defining the method.

List the equipment one item at a time. Include surfaces to clean, finishes to retain, and components to protect. Photographs should show both the deposit and the access route.

Ovens and cooking equipment

Provide the make, model, surface material, and deposit description. Mark coated surfaces, seals, burners, controls, and other components needing protection or separate handling. Include the manufacturer’s cleaning instructions where available.

Agree on the equipment condition at the time of work. Temperature, isolation, opening panels, and access should be addressed with the kitchen’s maintenance personnel. Do not assume that every part can be treated simply because the equipment is accessible.

Metal surfaces and removable components

For accessible stainless-steel panels, racks, trays, or other components, identify the finish and condition. Describe whether the target is grease, baked-on product, or another attached deposit.

If items are removed for cleaning, assign handling, support, and reassembly. Keep the components identified so they return to the correct equipment. Use a sample where the coating or surface response needs assessment.

Bakery and production-related assets

For bakery ovens, pans, or production machinery, use our bakery equipment service. Larger processing operations can use food processing equipment cleaning.

If the project includes packaging equipment, list it separately. A food-contact surface and an external machinery frame should not share an undefined cleanliness standard.

Keep exhaust-system and fire-system duties separate

A request to clean kitchen equipment should not be treated as a complete exhaust-system inspection or certification. Identify any hood, duct, fan, or fire-system work as a separate scope with the responsible provider.

If an accessible component near an exhaust system needs deposit removal, describe that component and provide the project requirements. Keep access, inspection, and the wider system duties visible in the proposal.

This distinction matters when several contractors share the same closure. The kitchen manager should know which equipment task each provider completes and who performs the final checks.

Define what comes off and what stays

Describe the deposit and how it has accumulated. Include prior cleaning methods and any damage or coating wear already present. Mark labels, seals, finishes, and nearby components that should remain untouched.

Use a representative test for an uncertain deposit or sensitive finish. Record the starting condition and the intended result before work. Inspect both the removed material and the retained surface afterward.

Our applications and limitations page explains the role of surface condition. Cleaning should have a defined stopping point rather than an open-ended instruction to make aged equipment look new.

Coordinate the work with kitchen operations

Provide the service schedule, preparation periods, and the time equipment can be released. Include the person responsible for clearing the area and making the equipment available.

Plan the sequence through isolation, preparation, cleaning, collection, inspection, and any follow-on sanitation. Reserve time for reassembly and release before the next food-service period. A short closure should not hide those tasks.

For a hotel or multi-department property, use hospitality cleaning to coordinate kitchens, laundry, and other equipment. For repeat visits, review maintenance planning.

Include work-area controls and collection

Review the work location, ventilation, noise, compressed-air arrangements, and separation from food, utensils, packaging, and nearby operations. The site’s responsible personnel should define the area available for cleaning.

Dry ice changes to gas during use. The deposit released from the equipment still needs collection and handling. Agree on the protection of adjacent surfaces and the scope of final area cleanup.

Our facility requirements and cleanup guide provide the planning background. Include any property-specific requirements before the visit.

Keep sanitation and return to service explicit

Define the surface-cleaning result with the kitchen manager and the person responsible for food safety. Identify any approved instructions that apply to the equipment.

This service does not make a blanket disinfection, sterilization, or allergen-removal claim. Assign the kitchen’s required sanitation, inspection, and verification steps separately. The responsible personnel should authorize return to food service.

If equipment needs mechanical servicing, keep that task in the sequence as well. A visibly clean component does not replace repair, adjustment, or a required operational check.

Price the defined equipment scope

A quote depends on the equipment list, deposit condition, accessible area, surface protection, preparation, and working hours. Include loading access, upper-floor restrictions, and other property requirements.

Ask the proposal to identify what is included in setup, cleaning, materials, collection, and handover. State any work your maintenance or kitchen team handles. Review our pricing guide when comparing the scope.

For several similar items, include a representative sample and condition differences. A group of trays or ovens should not be priced as identical without reviewing the actual buildup.

Commercial kitchen equipment cleaning questions

Can the work be done during a planned closure?

Yes. Provide the available window and the equipment list. Include the time your team needs afterward for inspection, sanitation, reassembly, and release.

Does the service replace routine kitchen cleaning?

No. It addresses the equipment and deposits in the agreed scope. Keep routine cleaning and the kitchen’s approved sanitation procedures in place.

How do we start with one problem area?

Send the location, equipment model, deposit description, and photographs. Discuss a test cleaning if the response of the surface or residue needs evaluation.

Request commercial kitchen equipment cleaning

Get a cleaning quote for commercial kitchen dry ice cleaning in NY, NJ, PA, or DE. Read commercial kitchen cleaning and the maintenance handoff to coordinate the specialist task with your team’s next steps.

Process reference: Application reference.